Fives High Precision Machines (Fives HPM) is positioning its Liné Machines RoboTDM as an alternative to large CNC machine tools for oversized parts that do not need the tightest tolerances. The system pairs an industrial robot with an end effector carrying a spindle, toolholder and cutter, so milling, trimming and drilling are performed directly on the workpiece instead of moving the component into a large machine envelope. Fives says the approach shortens setup, simplifies programming and avoids the cost and footprint of a large CNC machine.
The company targets applications where tolerances down to about 0.1 mm are acceptable. For those jobs, it argues, a CNC machine tool can mean paying for capability the part does not require, along with substantial setup and programming time.
Operations and workpieces
Fives lists face milling and deburring among the possible tasks, including removing burrs from castings and trimming excess weld beads. The system can also drill pilot holes in large aerospace panels or automotive body parts, and perform trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications. Instead of bringing the part to the machine, the machining capability is taken to the workpiece, which the company says can improve flexibility, cost and cycle time on suitable applications.
Narrowing the accuracy gap
Industrial robots have traditionally traded positional accuracy for flexibility, with conventional systems typically reaching tolerances of around 0.3 mm — too loose for many machining tasks. Fives says its development work on RoboTDM concentrated on closing that gap through what it calls high-precision robotic machining. Robot calibration, combined with look-ahead and motion-planning algorithms, allows programs containing more than one million points to be processed without the latency that can otherwise distort robot motion. According to the company, the result is smoother trajectory execution that supports multi-axis contouring and complex operations in a way closer to CNC machining, with machining deviation reduced by up to 100 μm (0.1 mm) — a threefold improvement over conventional robotic accuracy.
Configuration and integration
The end effector can be configured with different spindle sizes, power ratings, torque and speed to suit the task. Fives says available systems offer spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. RoboTDM can also incorporate automatic tool changing, tool measurement, tool-breakage detection and part probing, and a vision system can support drilling. Machining is not the only option: the platform can be configured for waterjet cutting, laser profiling and ultrasonic cutting. Multiple workstations and customized peripherals are possible, and relatively modest foundation requirements are intended to simplify installation compared with a large CNC machine tool.
Claimed gains and limits
Fives reports that a multi-year R&D project and development trials demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. The company does not present the system as a universal answer: where tolerances tighter than 0.1 mm are required, it says a high-precision CNC machine remains the appropriate choice, making RoboTDM complementary to the wider Fives HPM machine-tool portfolio. Fives frames the product under its “precision at scale” cross-brand approach, which it describes as applying the level of accuracy an application actually demands. The company notes that Fives Liné Machines Inc, now part of Fives HPM, has operated in North America for almost 50 years through its Granby, Quebec, facility, which builds both Liné CNC machine tools and robotic solutions including RoboTDM, and provides engineering, integration, automation, service and training support.
