Greenhouse growers may be able to find their place in a utility's rotating outage sequence, but most still lack a plan for what happens inside the greenhouse when that sequence is triggered. In California, an outage group or block is printed on the utility bill. Elsewhere, the same assignment may exist without being shown to the customer.
Federal reliability standards, including NERC's EOP-011, require grid operators across the country to maintain emergency plans for cutting load. Utilities use those plans when supply cannot meet demand, shutting off power in a systematic sequence, often with only minutes of notice. Hospitals and other critical facilities are protected where possible; most other customers, including greenhouses, are not.
Rolling outages have affected several regions during heat waves and winter storms. For a controlled-environment operation, a sudden loss of power can stop fans, pumps, irrigation, heating and environmental controls at the same time. The distinction between an outage and a curtailment matters: in an outage, equipment stops at once; in a curtailment, the grower decides in advance which loads to drop, how far to reduce them and which systems must stay on to protect the crop.
Four steps for a curtailment playbook
A curtailment plan is a written guide for the hours when the grid is stressed. The first step is to list major equipment and estimate its power draw, including supplemental lighting, fans, evaporative cooling, heating, pumps, dehumidification, controls and cold storage.
The second is to sort each load by priority. Some equipment can be shut off for a few hours without harming the crop; some can be reduced by dimming lights, staggering fan operation or moving a setpoint a few degrees; and some must remain on, such as controls, alarms and the systems that keep the most sensitive crop alive. The ranking depends on the crop and its growth stage and may change during the season.
The third is to use advance signals. An outage order may arrive with little warning, but heat waves and cold snaps are forecast days ahead, and grid operators generally issue public alerts before an emergency. Growers with a plan can pre-cool in the morning, irrigate early and close shade curtains before a summer peak. In winter, they can heat ahead of the coldest period, close thermal curtains early and confirm that backup heat is fueled and tested.
The fourth is to assign roles. The plan should name who receives the alert, who makes the decision and who carries it out. If an environmental controller can execute the sequence automatically, it should be programmed and tested. A plan that depends on one person being reachable at a weekend hour is fragile.
Completing those steps gives a grower a defensible estimate of how many kilowatts can be released, for how long and at what cost to the crop. That estimate is also the basis for demand response, in which utilities and grid operators pay customers to reduce load on request. Such programs exist in most of the country, largely because a megawatt that disappears on request is cheaper than one bought during an emergency.
Growers should ask their utility where a site falls in its outage plan, then develop a plan of their own. The utility's sequence sets the backdrop; the greenhouse's curtailment playbook determines how much control the grower retains when the grid is short.
