Custom Manufacturing

Hexagon launches HYPERSCAN SR wireless 3D scanner for industrial inspection

Hexagon's HYPERSCAN SR pairs WiFi 6, swappable batteries and dynamic optical tracking to move dimensional inspection onto the production floor.

Nkechi OkaforOctober 14, 20265 min read3 views
A wireless handheld 3D scanner and its separate optical tracking unit measuring a welded metal frame in an industrial workshop, illustrating cable-free on-site inspection.

Hexagon has launched the HYPERSCAN SR, a fully wireless optical tracking 3D scanner designed for dimensional inspection in production environments, supplier facilities and field-service locations. The Swedish measurement technology company introduced the system on October 12, 2026, describing it as the most mobile addition to its optical tracking scanner line.

The scanner combines WiFi 6 connectivity, swappable batteries and dynamic optical tracking to cut down the preparation typically required for dimensional inspection. According to Hexagon, inspection teams and field-service engineers can operate it without relying on a dedicated metrology specialist.

HYPERSCAN SR is aimed at small- to medium-sized components such as welded machine frames, cast housings, tooling, fixtures and vehicle interiors. The design allows measurements to be taken where a component sits, rather than requiring it to be moved into a dedicated measurement room.

Wireless optical tracking for on-site inspection

The system relies on dynamic optical tracking to maintain a common coordinate system between the scanner and the component being measured. Hexagon says this lets the system compensate for movement and vibration during scanning, conditions that can complicate dimensional inspection outside controlled environments.

Both the handheld scanner and its separate optical tracking unit carry wireless connectivity and battery power, removing the need for external wireless accessories or cables running between the two devices. The swappable batteries are rated for up to two hours of operation.

The handheld unit weighs 1.3 kg without its battery and carries an IP50 rating. It supports scanning rates of up to four million points per second and offers multiple modes for capturing surfaces, fine features, edges and holes.

Based on blue laser scanning technology, the scanner provides resolution down to 0.03 mm. Its maximum tracking distance is 4.2 m, with a tracking volume of 25.9 m³ and a recommended component size range of 0.1 to 6 m. Hexagon specifies volumetric accuracy of 0.06 mm at tracking distances up to 3.2 m, rising to 0.1 mm at the maximum 4.2 m distance. The system is calibrated in an ISO 17025 accredited laboratory, with measurement accuracy validated according to VDI/VDE 2634 Part 3.

Darren Goh, Product Director for Handheld 3D Scanners at Hexagon, said dynamic tracking makes the HYPERSCAN SR quick to deploy and simple enough for everyday operators to pick up and use, adding that its fully wireless, battery-powered design allows teams to bring it into limited-access and power-limited areas that larger cabled setups cannot reach.

Integrated inspection software and automation

The scanner ships with Hexagon's HH Scan software, which handles scan data management, alignment, dimensional measurements and inspection reporting. Operators can compare captured geometry against nominal CAD models using 3D colour maps without a separate software licence for these basic inspection functions. Data can be exported in STL, OBJ, PLY and other formats.

Compatibility with Geomagic Control X and PolyWorks supports further inspection workflows, while Geomagic Design X enables reverse engineering and the creation of editable CAD models from scanned geometry. Hexagon's advanced Geomagic packages are licensed separately.

An optional HYPERPROBE contact measurement accessory extends the system to features that are difficult to inspect optically. The scanner also supports Galaxy LEAP referencing, which uses common targets to align measurements captured from multiple tracking positions within a single coordinate system.

Beyond handheld use, the scanner can be integrated into robotic measurement systems through Hexagon's standardized integration kit. These capabilities can also support additive manufacturing workflows, including dimensional verification of 3D printed components against their original CAD models.

Expanding the HYPERSCAN range

HYPERSCAN SR joins the existing HYPERSCAN Ultra and HYPERSCAN Super as the most mobile option in the range. While the SR captures up to four million points per second, the Ultra and Super offer rates of up to 8.3 million points per second, with maximum tracking volumes of 50 m³ and 100 m³ respectively, suiting larger components and more extensive inspection operations.

All three systems share dynamic tracking technology, common software workflows and support for robotic integration. Hexagon positions the SR primarily for portable inspection, while the Ultra and Super target broader production and automated measurement applications. The company says HYPERSCAN SR is available globally through itself and its reseller network.

The launch follows Hexagon's October 2025 introduction of the ATLASCAN Pro, a handheld scanner aimed at small and medium-sized manufacturers, R&D teams and educational institutions that emphasized portability, straightforward operation and reverse engineering software compatibility. HYPERSCAN SR extends that focus on accessibility to a fully wireless optical tracking system.

Software integration has been a parallel area of development. In February 2025, Canadian 3D measurement specialist Creaform introduced Creaform.OS and the Creaform Metrology Suite, replacing its earlier VXelements software environment, with a redesigned interface, streamlined onboarding and integrated inspection and reverse engineering tools.