Instruments & Meters

SinceVision Launches Wide-Spot Laser Displacement Sensor for Textured Surfaces

The SGI-N030W pairs an expanded laser spot with optical triangulation to steady displacement readings on rough, matte and coated materials, with battery electrode thickness gauging as its lead application.

Saira QureshiNovember 17, 20265 min read1 views
Two laser sensor heads mounted above and below a moving electrode foil on a rigid gantry in a clean production setting.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor for high-speed, non-contact dimensional measurement of rough, textured and irregular surfaces. The unit extends the company's existing SGI Series portfolio and is aimed at lithium-ion battery production, semiconductor processing and precision mechanical engineering, where micrometre-level readings must hold up on materials that are not optically smooth.

Why the spot is widened

A conventional point-spot laser sensor concentrates its reflected energy on a very small area, so microscopic scratches, grain boundaries, brushed textures and matte finishes can register as signal variation and be read as a change in dimension. According to SinceVision, that behaviour can trigger false defect warnings and pull extra inspection work into the line. The SGI-N030W instead uses an expanded laser spot with optical triangulation, collecting reflected light across a broader patch of surface and averaging localised peaks and valleys before the signal is converted. The design is intended to damp the influence of surface roughness and optical scattering on materials including drawn metals, sandblasted surfaces and coated battery foils.

Specified performance and interfaces

The sensor has a 30 mm reference distance and a ±5 mm measuring range. SinceVision specifies 0.05 µm repeatability on a diffuse white target under static conditions, with linearity of ±0.02% of full scale across the range. Sampling runs at 50 kHz, equivalent to a 20 µs update interval, which the company links to monitoring of dynamic processes. Connectivity covers RS485, 100Base-TX Ethernet and switchable analogue output at either 4–20 mA or 0–10 V. A master-slave synchronisation function lets two heads work in opposition, measuring a component or moving material from both sides at once.

In-line thickness gauging for electrodes

The lead application identified by SinceVision is in-line thickness measurement of lithium-ion battery electrodes, where coating thickness and uniformity feed directly into energy density, internal resistance and long-term cell stability. Offline checks with contact micrometers or drop indicators, the company notes, depend on operator technique and can deform wet or uncured electrode material, while periodic spot readings leave most of a production reel unexamined.

The proposed arrangement places two synchronised sensors above and below a moving electrode web on a calibrated, low-thermal-expansion marble gantry. Each head measures its clearance to the material, and a controller combines those readings with the fixed mounting datum to derive absolute thickness in real time. In production trials, SinceVision reports stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate provides fine longitudinal resolution, so localised coating agglomerations, edge thinning and exposed substrate can be flagged before the electrode reaches cell winding.

Semiconductor and motion applications

For semiconductor manufacturing, where contact with sensitive wafer surfaces is undesirable, the sensor is proposed for wafer position verification, edge detection, height measurement, and checks on wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly it can track the motion of voice coil motors, linear actuators and micro-steppers, capturing transient displacement, mechanical oscillation, settling behaviour and end-stop overshoot across the full range. Position data can be sent to machine control over the Ethernet interface for real-time monitoring and process control.

Surface artefacts as a production problem

Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring difficulty in battery manufacturing and precision assembly. In his account, point-beam laser sensors can mistake microscopic scratches and rough coatings for genuine thickness variation, slowing production lines and creating additional manual inspection work. The SGI-N030W's expanded optical spot is designed to average out those surface-related variations, while head-to-head synchronisation supports high-speed thickness verification.