Tremec's manual-gearbox C8 Corvette development car is not a rumor: it exists, it runs, and it has been driven. The transmission supplier built the one-off machine with Peitz Performance and turned it over for evaluation at Motorsports Gateway, a new private track outside Howell, Michigan, where several potential customers were also invited to sample the company's transmissions.
The C8 was a major pivot for Chevrolet. It was the first Corvette with the engine behind the driver, and the first offered with a dual-clutch automatic and nothing else. According to the account of the drive, developing two transaxles, one manual and one automatic, that could mate to a mid-engine car was beyond GM's budget. Faced with a choice between pleasing a very small group of manual enthusiasts and winning comparison tests against far more expensive machinery, executives took the latter path, per that account.
What the development car is like
The Peitz car is a pure track build. Interior fit and finish is essentially absent, the cabin is fully caged and fitted with a harness, and the shift lever protrudes from the spot where a production C8 keeps its storage cubby and automatic selector. The seating position is virtually non-adjustable; at 5-foot-7 the driver could not comfortably reach the pedals or brace against the floor in corners, which made heel-toe downshifts awkward and limited how hard the car could be pushed. The session ran on a green track on a November afternoon in Michigan.
Installation was simpler than expected
Peitz did not have to make significant alterations to fit the gearbox. The tunnel was cut to install the clutch pedal hardware, but the manual transaxle sits exactly where the stock dual-clutch unit would, with no special mating hardware required. The C8's pedal box reportedly has plenty of room for a third pedal and feels roomier than a previous-generation Camaro's.
Shift feel and its trade-off
The shifter is remotely mounted, with a cable running rearward to the transaxle, rather than mechanically linked to the transmission as on front-engine cars using the TR-6060 six-speed. The result is a mechanism that feels less precise and less notchy than its front-engine cousin, smoothing off some of the Tremec unit's rougher edges. Some drivers will prefer that; others will miss the more mechanical feel of the direct linkage. Closing the gap would mean moving the engine forward, which gets you a C7, or shifting the driver's seat rearward to roughly where the C8's engine sits.
Cost and what comes next
That trade-off is small next to the price. The gearbox alone is quoted at about $75,000, so a converted manual C8 lands near the cost of a showroom-spec Z06 once the Corvette itself is included. Tremec says the price will come down as volume increases, and that OEMs are interested in a high-torque manual transaxle, not necessarily or exclusively General Motors. The company did not name prospective customers. Tremec's existing six-speed already serves GM performance models including the Cadillac Blackwing cars and the now-discontinued Camaro, and the manual C8 unit was engineered specifically to fit the Corvette's mid-engine layout.
